Industrial bicycle chain lubricants - ways to extend bicycle chain life:
In most cases, many companies ignore the importance of chain lubrication. Therefore, it is futile to shorten the life of the industrial chain and increase the frequency of replacing the whole chain, thus increasing unnecessary maintenance costs. At present, most chains are adhered to the surface of the chain by high-viscosity lubricating oil or grease. Although it can have a certain lubrication effect on the chain teeth and the chain surface, it is almost impossible to penetrate the internal chain pins, bushings and rollers.
Most bicycle chain failures are caused by:
1, when the inside of the chain is not completely lubricated, it will cause wear and corrosion. And cause the chain to loosen or kink.
2, when the chain is running at high speed, it can not play an effective lubricating protection role on the chain due to the centrifugal force after throwing off the lubricant.
3, environmental factors will also cause chain transmission failure. When the chain operates in dusty and wet conditions, dust and moisture may enter the interior of the chain, causing corrosion and wear.
To extend the life of the chain, we need to choose the appropriate lubricant for industrial operation, including: operating temperature, speed and load.
Selection criteria for chain lubricants
Before choosing the right lubricant, we must consider the important operating conditions such as: temperature, food grade and load pressure. When the operating temperature rises above 150 ° C, ordinary lubricants can no longer be effectively lubricated and begin to decompose and evaporate. Maintenance costs will therefore increase as a result of frequent replacement of lubricants.
Add: Room 1212,Wanda Future tower,Hefei city,Anhui province, China
Copyright © 2024 ANHUI MORSHINE INTERNATIONAL CO.,LTD All Rights Reserved. Sitemap Blog XML Privacy Policy Network Supported